Hello,
Could you please tell me how to set the time on my fossil-starck, cause I do have the manual, but due to moving..it is somewhere, but where..?!
You’d make me very happy, many friend tried..but..as you know, it’s too hard..so I now have a watch which says it is 5 hours and 15 minutes earlier than it actually is.
Thanks! Evelien
Evelien,
The button on the bottom left controls the mode. When you push this button one of the four modes will flash (TIM 1, TMR, ALM 1, or CHRO). Push the mode button until TIM 1 flashes. Now, you are in Time 1 Mode. You should be able to see the time, seconds and date on the face of the watch.
Hold down the mode button until the hour starts flashing. You can now set your time. The top right hand button will move you from hours to minutes to date, etc. The bottom right hand button will change the digits. When you have set it correctly, you can press the mode button (bottom left hand button) and it will start acting like a normal watch again.
In normal time mode, you can switch to TIM 2 by pressing and holding the bottom right hand button and set the dual time in the same manner.
I hope this is helpful to you,